Making A Copy Lighter Or Darker; Collating Copies Using The Control Panel - Lexmark X6570 User Manual

3
If necessary, press Copy Mode.
4
Press .
5
Press or repeatedly until Quality appears.
6
Press .
7
Press or repeatedly until the quality you want appears.
8
Press .
9
Press Start Color or Start Black.

Making a copy lighter or darker

If you want to adjust the look of a copy or photo, you can adjust it to make it lighter or darker.
1
Load paper.
Note: If you are copying photos, use photo or heavyweight matte paper, with the glossy or printable side facing
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
2
Load an original document facedown on the scanner glass.
3
From the control panel, press Copy Mode.
4
Press Lighter/Darker.
5
Press or repeatedly to adjust the slider.
6
Press .
7
Press Start Color or Start Black.

Collating copies using the control panel

If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies
as groups of pages (not collated).
Collated
1
Load paper.
2
Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner
glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.
3
From the control panel, press Copy Mode.
4
Press .
5
If necessary, press
6
Press .
or repeatedly until Copies appears on the display.
Not collated
Copying
39