Jams And Misfeeds Troubleshooting - Lexmark X6570 User Manual

Lexmark x6570: users guide
Hide thumbs Also See for X6570:
Table of Contents

Advertisement

Check cartridges
1
Remove the print cartridges.
2
Make sure the sticker and tape have been removed.
3
Reinsert the print cartridges.
Received fax has poor print quality
These are possible causes and solutions. Try one or more of the following:
Review checklist for sender
Check that the quality of the original document is satisfactory.
Resend the fax. There may have been a problem with the quality of the telephone line connection.
Increase the fax scan resolution.
Check ink
Check the ink levels, and install a new print cartridge if necessary.
Caller ID information is not displayed
Caller ID pattern may not be set correctly
The printer supports two distinct Caller ID patterns: Pattern 1 (FSK) and Pattern 2 (DTMF). Depending on the country
or region you live in and the telecommunications company you subscribe to, you may need to switch the pattern for
the printer to display Caller ID information. For more information, see "Using Caller ID from the control panel" on
page 76.

Jams and misfeeds troubleshooting

Paper jam in the printer
Remove the paper manually
1
Press
to turn off the printer.
2
Firmly grasp the paper, and gently pull it out.
3
Press
to turn the printer back on.
Paper jam in the Automatic Document Feeder (ADF)
1
Flip open the ADF by grasping the notch in the left side of the ADF and pulling up.
2
Firmly grasp the paper, and gently pull it out.
3
Close the ADF.
4
Press
.
2
Troubleshooting
182

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents