Note: The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
Related topics:
•
"Inserting a memory card" on page 87
•
"Using the control panel" on page 109
Connecting a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without
using a computer. You can connect a PictBridge-enabled digital camera to the printer, and use the camera to control
printing photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
•
Make sure the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB selection
is incorrect, the camera will be detected as a USB storage device, or an error message will be displayed on
the control panel of the printer. For more information, see the documentation that came with your camera.
•
The printer reads only one media device at a time.
3
If the PictBridge connection is successful, the following appears on the display: PictBridge Camera
detected. Press
Related topics:
•
"Understanding the PictBridge menu" on page 116
to change the settings.
Working with photos
89