Lexmark X6570 User Manual page 130

5
Press .
If you set a PIN during network setup and are being asked for it:
a
Enter the PIN using the keypad on the control panel.
b
Press .
The Network Card Reader dialog appears on the computer screen.
To adjust settings for the Network Card Reader:
1
Choose Lexmark Network Card Reader
2
If necessary, click General.
3
Choose whether to show a notification dialog whenever a memory device is inserted into the printer.
4
Click Settings.
5
Assign a name to your computer.
6
Choose whether to specify a PIN to be able to access to your computer.
Note: The PIN should be a combination of four digits from 1–9.
7
Click Apply.
These buttons are at the bottom of the Network Card Reader dialog:
Click
+
–
Save
Preferences.
To
Add a network printer to the list.
Remove a network printer from the list.
Connect to a network printer on the list.
Disconnect from a network printer on the list.
Adjust the size of the thumbnail/s on the Network Card Reader dialog.
Go to the Help Center to find more information.
Save the selected images on your computer.
Understanding the printer
130