Lexmark X6570 User Manual page 41

8
When asked if you want to Scan another page?, press
9
Place the next page facedown on the scanner glass. If you have a two-sided original, load the original document
with the other side facedown on the scanner glass, and then press
The printer scans the next page—or the other side of the original document—and then prints.
10
Repeat step 8 and step 9 for each two-sided copy you want to make.
Copying on both sides of the paper using the Automatic Document Feeder
(ADF)
The printer has a built-in duplex unit that lets you copy on both sides of the paper.
Note: For two-sided copying, use only plain paper in letter or A4 size. Do not make 2-sided copies on envelopes,
card stock, or photo paper.
1
Load paper.
2
Load an original document faceup in the Automatic Document Feeder.
Note: You can load up to 25 pages at a time in the Automatic Document Feeder (ADF).
3
Make sure the light is on.
4
From the control panel, press Copy Mode.
5
Adjust the copy settings.
Note: If you are copying a two-sided original document, press
Original.
6
Press to save your settings temporarily.
7
Press .
The printer scans the front side of each page of the original document.
8
If you are copying a two-sided original document, the printer will display this message: Reload the Original
in the Automatic Document Feeder without flipping or rotating the stack, then
.
press
9
Press .
Repeating an image on one page
You can print the same image multiple times on one sheet of paper. This option is helpful in creating labels, decals,
flyers, and handouts.
1
Load paper.
Note: If you are copying photos, use photo or heavyweight matte paper, with the glossy or printable side facing
you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
2
Load an original document facedown on the scanner glass.
3
From the control panel, press Copy Mode.
4
Press .
5
Press or repeatedly until Repeat Image appears.
to choose Yes.
.
twice and select the menu item 2-Sided
Copying
41