Shademaker SOLARIS Series Owner's Manual page 7

Attach Mast to Internal Stem
1. Lift rotating handle from mast.
2. Rotate umbrella mast until the bore holes for the turning handle bolts in the
internal stem line up in the mast.
3. Insert (3) turning handle bolts into mast and internal stem. Tighten with
5mm hexagon wrench to secure.
NOTE: Do not use power drill. May cause damage to umbrella.
Solaris style
on internal stem
You are now ready to operate your umbrella!
Proceed to Operating Instructions on page 7.
3 bore holes
Polaris style
6