OPTION B:
If you wish not to use optional internal stem cover, proceed
below.
1. With your umbrella laying on a clean soft surface, remove internal stem from
bottom of mast by removing the (3) turning handle bolts underneath the
turning handle. NOTE: Do not remove the bolt above the turning handle!
2. Install internal stem onto mount kit or free-standing base with supplied 4
stem bolts. Tighten with provided 5mm hexagon wrench to secure.
NOTE: Do not use power drill. May cause damage to umbrella.
Do not
remove!
3 turning
handle
bolts
3. Remove internal stem cover from bottom of umbrella mast.
4. Using a two person team, lift umbrella and insert bottom of mast onto
internal stem.
5
Solaris style
Do not
remove!
3 turning
handle
bolts
Polaris style
Need help?
Do you have a question about the SOLARIS Series and is the answer not in the manual?