5.6 Set settings
5.6.1
You can specify whether the button on the ultrasonic converter must be held
down in order to activate the ultrasound, or whether it is switched on and off by
pressing briefly.
1. On the startup screen, tap "Settings".
2. Tap "UW button".
3. Select a setting.
4. Confirm your entry with the "Confirm/Save" button.
5.6.2
1. On the startup screen, tap "Settings".
2. Tap on "System".
3. Tap "Brightness".
4. Set the desired brightness.
5. Confirm your entry with the "Confirm/Save" button.
5.6.3
1. On the startup screen, tap "Settings".
2. Tap on "System".
3. Tap "Language".
4. Select the desired language.
5. Confirm your entry with the "Confirm/Save" button.
5.6.4
Information
The time does not adjust automatically to summer time. At the start and end of
summer time, you must reset the time.
1. On the startup screen, tap "Settings".
2. Tap on "System".
3. Tap on "Time/Date".
4. Tap the values to be changed. Enter the desired values. Confirm the entries
with the "Confirm/Save" button.
5. Exit the "Time/Date" screen by pressing the "Confirm/Save" button.
51846-000 en/2022-07
Adjusting the button function
Adjust brightness
Set the language
Setting the time and date
/5
Operation
21/36