Changing Settings On The Trison Base; Attaching And Removing The Trison Lift - BANDELIN TRISON Operating Instructions Manual

4 /
Preparation for operation

4.3 Changing settings on the TRISON Base

Adjusting the screen brightness
From the startup screen select "Settings", then "User", and then "Brightness" to
adjust the screen brightness.
Setting the date and time
From the startup screen select "Settings", then "System", and then "Time/Date"
to set the time and date.
Information
The time does not adjust automatically to summer time. At the start and end of
summer time, you must reset the summer time.
Changing settings for the cleaning of robotic instruments
Robotic instruments have a pre-set soaking time of 30 minutes and a cleaning
time of 30 minutes. You can switch off the soaking time and reduce the cleaning
time to 15 minutes.
1. On the startup screen, tap "Settings".
2. Tap on "System".
3. Tap "Robotics runtime".
4. Enter the password "1983" when prompted.
5. Select the soaking and cleaning time for the robotics program.
Changing settings for the cleaning of MIS instruments
For MIS instruments, a cleaning time of 15 minutes and a filling volume of
35 litres are pre-set. The filling volume conforms to the TE? 3000 oscillating tank.
You can adjust the cleaning time and the filling volume.
1. On the startup screen, tap "Settings".
2. Tap on "User".
3. Tap "Process data".
4. Select the cleaning time and filling volume for the MIS program.

4.4 Attaching and removing the TRISON Lift

Push the foot element of the TRISON Lift backwards into the foot guide, until the
TRISON Lift engages.
Fig. 10 Attaching the TRISON Lift
18/54
6536-000 en/2022-03