Fast Shut-Down Of The Ultrasonic Bath; Menu Functions; User Settings - BANDELIN SONOREX DIGITEC RC Instructions For Use Manual

Error messages (red):
Message
Error while loading the language
Connection broken
Ultrasonic bath not found!
Communication error!
Establishment of connection
failed! ...

4.2.5 Fast shut-down of the ultrasonic bath

The ultrasonic bath is turned off with the "Ultrasonic bath off" button (ultrasound and
heating).
Turning on the ultrasonic bath from the program is not possible for safety reasons. In
order to continue operating, the ultrasonic bath must be turned on by pressing the "On/
Off" key on the ultrasonic bath.
4.3

Menu functions

4.3.1 User settings

Through the menu item File  User settings, there is an option to save the current
settings on the user interface in the form of data sets, and to restore them at a later
time using the "Loading" function.
Similar work processes can be automated in this manner.
The target temperature, the prescribed runtime, the operating mode setting, the
language setting, and the selected COM port are saved as parameters in the data sets.
Explanation
e.g. language fi le not found
Connection to ultrasonic bath was broken.
Connection to ultrasonic bath not found.
Disruption of serial communication between
ultrasonic bath and PC.
Defi nitive interruption of the communication set-
up.
19