Page 1
User instructions High-performance ultrasonic bath C 255 51346-007 GB/2020-08...
Page 2
Copyright & limitation of liability This document may not be reproduced, either in full or in extracts, without prior approval of BANDELIN electronic GmbH & Co. KG, hereinafter referred to as BANDELIN. The German original is the binding version of this document. Any diff erences in the translation are not binding and have no legal eff...
Page 3
Operating sequence Identifi es instructions that are to be followed in the described instructions sequence. 51346-007 GB/2020-08 3 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Fill the oscillating tank and de-air it ................22 Degassing the fl uid .....................23 Ultrasound operation ....................24 Refresh / replace the contact liquid................25 Further information .....................26 4 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Page 5
Chemical agents ......................42 Consumable materials - not applicable - ..............42 Taking the unit out of service ..................42 Key words ........................43 51346-007 GB/2020-08 5 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
- Electromagnetic Compatibility Directive - RoHS Directive in their currently valid versions. The declaration of conformity can be requested from the manufacturer. 8 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Protected from dangerous parts dripping water Protected against solid foreign bodies with a diameter of 2.5 mm or larger 51346-007 GB/2020-08 9 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
It is suitable for use in facilities and areas which are directly connected to a public low- voltage supply network, e.g. medical laboratory facilities. 10 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Caution: Switching only with potential-free contact relay or optocoupler. Contact may be loaded with 60V, 0.5A, maximum 10VA against CLP_COMMON 51346-007 GB/2020-08 11 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
• Do not fi ll the oscillating tank with hot water (> 30 °C). The fi lling temperature should be between 15 and 25 °C. 12 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Page 13
51346-007 GB/2020-08 13 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
• The ultrasonic bath must be positioned in such a way that disconnection from the power supply is easily possible. 14 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Caution! Safely store the rubber stoppers for later emptying or refi lling of the tank, or for safe transportation. 51346-007 GB/2020-08 15 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
The last-selected parameters ( runtime, target temperature, target power) will be saved and accessed the next time the device is turned on. 16 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Error (see error number). The ultrasonic bath or ultrasound cannot be started. Newly-occurring errors are notifi ed with a short audible signal and sometimes with a blinking warning sign 51346-007 GB/2020-08 17 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
The display is similar to the one 12:00:00 17.0°C for Stand-by mode; however the message "p-a-u-s-e" appears on the next to last row. 18 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
• With a target temperature below 15 °C, the ultrasound may be occasionally switched off under normal ambient conditions (approx. 20 °C). This can be prevented by reducing the ultrasound power setting. 51346-007 GB/2020-08 19 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
"00:00:00" and a short audible signal will be emitted. The ultrasonic bath will be in stand- by mode once again. 51346-007 GB/2020-08 21 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
If the level of the liquid drops signifi cantly below the fi lling level mark, water must be 22 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
The contact liquid must visibly and palpably flow into the tank through the (tank) inlet. Set the degassing time (10 min) and activate the ultrasound, see chapter 3.5. 51346-007 GB/2020-08 23 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
The last-selected parameters ( runtime, target temperature, target power) will be saved and accessed the next time the ultrasonic bath is started. 24 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
• A complete emptying of the ultrasonic bath is not possible. A small amount of contact liquid always remains in the ultrasonic bath. Caution! Pressurised air may NOT be blown through the hose conduits. 51346-007 GB/2020-08 25 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
In every case, the statutory provisions and regulations of municipal wastewater plants must be adhered to. Information is provided by municipal wastewater plants as well as by environmental agencies. 51346-007 GB/2020-08 27 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
The extraneous rust produces localised corrosion of the stainless steel. For this reason, remove rust stains immediately using a soft cloth and a commercial stainless steel cleaning product without abrasive additives. 28 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
The lid should be placed on top in order to protect the oscillating tank from outside contamination. 1 VAH: Verbund für angewandte Hygiene (Alliance for Applied Hygiene)/Germany 51346-007 GB/2020-08 29 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Close the shut-off valve and fi ll with clear water. Start up for 5 minutes (with and without cooling). 30 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Page 31
- An air current is detectable on the rear side of the outgoing air opening. - The fan motor can be heard relatively well. Switch off the ultrasonic bath. 51346-007 GB/2020-08 31 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Page 32
The preparation must be approved by the manufacturer for use in ultrasonic baths. 2 Investigations on test procedures for ultrasonic cleaners. IEC/TR 60886 (1987-03) 32 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Page 33
4.4 and 6.3.2.1. Sample foil after a test in one inset beaker. 51346-007 GB/2020-08 33 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
The following overview of possible sources of error should serve as an aid for error detection and elimination. 34 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Switch the ultrasonic bath off and back on. If the error appears = US module (FH1) = again, contact the manufacturer. 51346-007 GB/2020-08 35 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Natural wear Ultrasonic bath OK. the bottom of the bath? Main fuses activated Voltage peaks (internal protection using overvoltage arrester) 36 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
If the desired results are not obtained or if the pump does not run, the ultrasonic bath must be sent in for repair. 51346-007 GB/2020-08 37 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
The fuses (2× microfuses 5 × 20 mm, T 4 A) are housed in a plug-in module in the mains socket, which is located on the rear side of the ultrasonic bath. 38 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
CH time 000001:14:20 sw/ar 00266/00000 The Service menu may be exited at any time by pressing the [START/STOP] key. 51346-007 GB/2020-08 39 / 46 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
• Plastic accessories such as insert baskets, silicone knob mats or lids must be decontaminated and disposed of. • The packing is recyclable. 42 / 46 51346-007 GB/2020-08 1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com...
Page 45
13, 17, 21, 24, 28 Warning instructions 3, 12 If Service is required, please contact the specialist dealer or write us to the address specifi ed. BANDELIN electronic GmbH & Co. KG www.bandelin.com Zertifi ziert nach Heinrichstraße 3 – 4 info@bandelin.com...
Page 46
Note: The user instructions in this and other languages, as well as further information, can be found in the enclosed CD.
Need help?
Do you have a question about the SONOCOOL 255 and is the answer not in the manual?
Questions and answers