Warnings - Graco SaniForce 1040 Repair Parts List Manual

Warnings

Warnings Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
FIRE FIRE AND FIRE
Flammable fumes, such as solvent and paint fumes, in work
or solvent flowing through the equipment can cause static sparking. To help prevent fire and
explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
• Ground all equipment in the work area. See Grounding
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Use only grounded hoses.
Stop operation
• Stop Stop
equipment until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
• Route exhaust away from all ignition sources. If diaphragm ruptures, fluid may be exhausted
with air.
PRESSURIZED EQUIPMENT
PRESSURIZED PRESSURIZED
Fluid from the equipment, leaks, or ruptured components can splash in the eyes or on skin
and cause serious injury.
• Follow the Pressure
cleaning, checking, or servicing equipment.
• Tighten all fluid connections before operating the equipment.
• Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.
3A6780C
Tel: 866-777-6060
Fax: 866-777-6383
WARNING
AND EXPLOSION AND EXPLOSION HAZARD EXPLOSION HAZARD HAZARD
operation immediately immediately if static sparking occurs or you feel a shock. Do not use
operation immediately
EQUIPMENT HAZARD HAZARD
EQUIPMENT HAZARD
Pressure Relief Pressure Relief Procedure Relief Procedure when you stop spraying/dispensing and before Procedure
Springer Pumps, LLC
work area area can ignite or explode. Paint
work area
Grounding instructions. Grounding
Website: www.springerpumps.com
Warnings
3
Int'l: +001 267 404 2910