Graco SaniForce 1040 Repair Parts List Manual page 25

Fluid Fluid Temperature Fluid Temperature Temperature Range
Temperature limits are based on mechanical stress only. Certain chemicals will further limit the fluid
temperature range. Stay within the temperature range of the most-restricted wetted component. Operating
at a fluid temperature that is too high or too low for the components of your pump may cause equipment
damage.
Diaphragm/Ball/Seat Material
Diaphragm/Ball/Seat Diaphragm/Ball/Seat
FKM Fluoroelastomer (FK)
Polychloroprene check balls (CW)
PTFE overmolded diaphragm (PO)
PTFE check balls (PT) or two-piece
PTFE/Santoprene diaphragm (PS)
Santoprene (SP)
The maximum temperature listed is based on the ATEX standard for T4 temperature
classification.
3A6780C
Tel: 866-777-6060
Fax: 866-777-6383
Range Range
Stainless Steel
Stainless Stainless
Range
Range Range
Material Fahrenheit
Material Fahrenheit Fahrenheit
-40° to 275°F
0° to 180°F
40° to 180°F
40° to 220°F
-40° to 180°F
Springer Pumps, LLC
NOTICE
NOTICE NOTICE
Steel Pump Pump Fluid Fluid Temperature Temperature
Steel Pump Fluid Temperature
Celsius
Celsius Celsius
-40° to 135°C
-18° to 82°C
4° to 82°C
4° to 104°C
-40° to 82°C
Technical Data
Website: www.springerpumps.com
Int'l: +001 267 404 2910
25