Installing The Batteries; Using The Remote Control - Strong SRT 32HC4043 User Manual

Led tv with dvb-t2/c/s2
Hide thumbs Also See for SRT 32HC4043:
Table of Contents

Advertisement

6. VOL +/-
7. SMART KEY
8. CH +/-
9. INFO
10. SOURCE
11. RETURN
12. MENU
13. 
14. pq t u
15. OK
16. TEXT
17. SUBTITLE
18. LIST
19. FAV
20. 20. COLOUR BUTTONS

2.5 Installing the batteries

Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the
polarity markings inside the compartment.
NOTE:
1. Slide the cover horizontally.
2. Put 2x AAA batteries in the compartment and make sure the polarity is correct.
3. Slide horizontally to close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insufficient which affect the use range, you should replace it with
a new battery. Remove the batteries from the remote control unit if you do not intend to use it
for a long time.
3. Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.

2.6 Using the remote control

Use the remote control by pointing it towards the remote sensor. Items between the remote
control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit
by heat.
6
Adjust the volume up or down.
Press to open extra options.
Change programmes up or down. Big steps in Channel list.
Display information about the current source.
Select the input source mode.
Step back in some menu options
Open the menu options. Step back in some menu options.
Exit the current menu.
Navigate the menu.
Confirm the selection.
Press to enter or exit the teletext menu.
Enable/disable subtitles in DTV/USB mode.
Press to enter into the channel list.
Press to view your assigned favourite list or main list channels. Press pq to
cycle through your assigned favourite channels, press OK to confirm. To open
the selected list directly, you can press the LIST button.
Press to execute the prompt function in TV or DTV menu mode.
Pictures are only for reference. Actual items may differ.
Fig. 5

Advertisement

Table of Contents
loading

Table of Contents