Table of Contents
Advertisement
5. AV IN
6. HDMI
7. S/PDIF (coaxial) Use an RCA cable to connect your TV to a compatible digital amplifier or
8. SATELLITE IN
9. ANTENNA IN
NOTE:
2.5 Remote control
1. q
2. !
3. 0 ~ 9
4. ECO
5. EPG
6. VOL +/-
7. (-/--)
8. CH +/-
9. INFO
10. SOURCE
11. RETURN
12. MENU
13.
14. pqt u
15. OK
16. TEXT
17. SUB
18. LIST
19. FAV
20. COLOUR BUTTONS
21. AUDIO
2.6 Installing the batteries
Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the
polarity markings inside the compartment.
6
3.5 mm female jack entry for composite video and left/right audio
connection.
Connect HDMI input signal from a signal source such as DVD, Blu-ray player
or game console.
Home theatre set.
Connect a satellite dish to the TV for searching programmes.
Connect a terrestrial antenna or cable connection from your provider to the
TV for searching programmes.
The 12V DC input port of this TV set, is only intended for stable DC voltage.
The input voltage range is 11.25V ~ 13.75V. User cannot use power input
beyond the voltage range, otherwise it may damage the TV set. In no case
both 12V connector and 230V power shall be connected to the TV at the
same time. It could damage it.
Press to turn the TV on or standby.
Press to mute or restore the volume.
Choose channel directly.
Screen brightness modes for energy saving
Press to display the current EPG information in DTV mode.
Adjust the volume up or down.
Change the maxium input programme digit
Change programmes up or down. Big steps in Channel list.
Display information about the current source.
Select the input source mode. SAT/ DVBT/HDMI...
Press to go back to previous viewed channel.
Open the menu options. Step back in some menu options.
Exit the current menu or page.
Navigate the menu or select channel list group
Confirm the selection or to call channel list.
Press to enter or exit the Teletext menu.
Enable/disable subtitles in DTV/USB mode.
Press this button to call one or return to channel list
Use / button select one.
Press to view your assigned favourite list.
Press to execute the prompt function in TV or DTV menu mode.
Press to select available audio languages. Selecting audio description, a
narrator will describe what is happening on the screen for blind or visually
impaired viewers. Press again to turn it off (depending on broadcast).
Fig. 4
Fig. 5
Advertisement
Table of Contents
