Safety Regulations; Motor Data Combimatic; Compressed Air Data Combimatic - Markusson combiMatic User Manual

SAFETY REGULATIONS

Locate the machine where it is not exposed to rain or damp.
The site must be well lit.
The machine must not be located close to gas, liquids or other
materials that might catch fire or explode.
Only a service technician is permitted to carry out work on the
machine.
To avoid mistakes when sharpening chainsaw chains, it is extremely
important to understand how the sharpening machine works.
Read the instruction manual carefully before doing any sharpening
with the machine.
Always wear safety gloves and safety goggles.
Always check the condition of the grinding wheels.
Cracked, vibrating or wobbling grinding wheels must be discarded.
To avoid breakdowns, clean the machine to remove grinding dust.

MOTOR DATA COMBIMATIC

Grinding motor
Voltage: 12 Volt DC
Rotation speed: 2800 r/min
Peripheral speed: 22 m/s
Power: 90 Watt
Current: 7,5 A
Grinding wheel: 150x4x16 mm
Overcurrent protection: Automatic fuse, ptc type
Machine weight 15,9 kg (without stand)
Machine dimensions: L475mm x D140mm x H395mm (Without stand)
Stand dimensions: L400mm x D460mmm x H1070mm
Working voltage: Min 12 Volt DC, Max 15 Volt DC

COMPRESSED AIR DATA COMBIMATIC

Min 5 Bar
Max 8 Bar
4