Table of Contents
Advertisement
GENERAL
This user guide describes in detail how to use, maintain and inspect the chain
sharpening machine. It also describes the steps to be taken to ensure maximum
safety, how the safety components are designed, how they work and how to
check and inspect them. It also explains how to carry out any repairs that might
be needed.
NOTE:
Everyone who will install, use or repair the chain sharpening machine must
read and understand this manual.
The user guide covers installation, user and the various maintenance
actions that can be done by the operator. More detailed servicing or
troubleshooting must be done by the dealer's servicing team. The user
guide describes all the necessary safety-related components. Anyone
who intends to use the machine must read and understand it before
the chain sharpening machine is installed. Symbols and warning signs
shown on this page appear in this manual and on the chain
sharpening machine.
If a warning decal on the machine has been damaged or is worn, a
new one must be applied as soon as possible to ensure the greatest
possible safety when using the chain sharpening machine.
DESCRIPTION OF FIELD OF APPLICATION
The machine is designed to be used to sharpen cutting chains as
used on power saws, forestry machines and harvesters.
The machine can sharpen the cutting teeth of chains and lugs. It
works automatically.
The machine must be used indoors.
The machine is powered by a 12-Volt DC supply.
2
Advertisement
Table of Contents
