Sharpening Double Linked Chains; Maintenance - Markusson combiMatic User Manual

SHARPENING DOUBLE LINKED CHAINS

If the chain has a double link, sharpening should start there. Begin with the left one as
shown in picture below.

MAINTENANCE

Replacing the grinding wheel (disc).
Always turn power off!
1. Lift the grinding head (1) and remove the guard (4).
2. Hold the grinding wheel (2) and loosen the nut (3) manually or with a pair of pliers.
3. Remove the old wheel and fit a new one. Tighten the nut by hand (3).
19