Operation Grinding Machine - Markusson combiMatic User Manual

OPERATION GRINDING MACHINE

 If the grinding head is pointing in wrong direction, push switch to change = switch
8.
 Start automatic mode (feeding) = switch 2.
 Set the stroke for the chain-type = 15.
 Program the number of teeth to be grinded= counter 4.
 Programmera rätt antal tänder som skall slipas = Räkneverk 4
 Set the approx. sharpening depth = knob 19.
 Set the approx. sharpening length = knob 10.
 Start grinding motor = switch 1.
 Finetune the sharpening depth. = knob 19.
 Finetune the shapening length. = knob 10.
 Stop the automatic mode. = switch 2.
 Stop the grinding motor. = switch 1.
 Adjust grinding speed. = Knob 3 (Grinding a lot of material = turtle)
 Pull the chain back to the first tooth grinded (If double link, start with the link to the
left). Reset counter (red button) and start sharpening.
17