Restoring Factory-Default Settings - Lexicon MC-4 User Manual

Troubleshooting & Maintenance

RESTORING FACTORY-DEFAULT SETTINGS

When factory-default settings are restored, all parameters and
user-defined values are restored to their factory-default settings.
Before restoring factory-default settings, it is recommended that
you record all user-defined settings on the installation worksheet
that begins on page A-14.
To restore factory-default settings:
1. Record all user-defined settings on the installation worksheet
that begins on page A-14. When factory-default settings are
restored, all parameters and user-defined values are restored to
their factory-default settings.
2. If the MC-4 is powered on, press the front panel Standby
button or the remote control Off button to activate standby
mode and deactivate the MC-4. If the MC-4 is in standby
mode, proceed to step 3.
3. Press the front panel Standby button or the remote control On
button to deactivate standby mode and activate the MC-4.
4. Quickly press and hold the front panel or remote control Mute
button until the FACTORY SETTINGS menu shown below
opens in the on-screen and front panel displays.
FACTORY SETTINGS
EXIT
RESTORE DEFAULTS
RESTORE DEFAULTS
The Mute button must be pressed within 2 seconds of
activating the MC-4. If the message MUTE ON appears in the
on-screen and front panel displays when the Mute button is
pressed, too much time has passed. If this occurs, begin again
with step 2.
6-4
5. Press the remote control Menu
the desired option. Highlight the RESTORE DEFAULTS option to
restore factory-default settings. Highlight the EXIT option to
close the FACTORY SETTINGS menu without restoring factory-
default settings.
6. When the desired option is highlighted, press the Menu
arrow to select this option.
• If you selected the RESTORE DEFAULTS option, the
FACTORY SETTINGS message shown below appears in the
on-screen and front panel displays. When this message
appears, press a front panel or remote control button to
restart the MC-4.
FACTORY SETTINGS
EXIT
RESTORE DEFAULTS
RESTORE DEFAULTS
• If you selected the EXIT option, the FACTORY SETTINGS
menu will close and the two-line status (page 2-14) opens
in the on-screen and front panel displays.
Lexicon
and arrows to highlight
FACTORY SETTINGS
HAVE BEEN RESTORED
PRESS ANY KEY
TO RESTART