2Ch Status - Lexicon MC-4 User Manual

MC-4
If the STATUS menu includes a second page, the PG1 indicator
displays in the top-right corner of the on-screen display.
While holding the S1 button, press and release the Stat
button again to open the second page. If the STATUS menu
does not include a second page, pressing and releasing the
Stat button closes the menu. (If this occurs, begin again with
step 1.)
3. When the desired STATUS menu page is open, release the S1
button to deactivate the shift 1 command bank. Then press
the remote control Menu
and downward through STATUS menu parameters available
on the current page. When the S1 button is held, the Menu
arrows cannot be used to scroll through STATUS menu
parameters.
Note:
STATUS menu parameters provide information about
the current input source and listening mode. These
parameters cannot be adjusted.
4. Press the Stat button or the Menu
STATUS menu. If the second page of the STATUS menu
opens, press the Stat button or the Menu
close the STATUS menu.
STATUS menu descriptions begin in the next column. The table
beneath each description lists the default and possible settings for
each parameter. See "STATUS Menu Parameter Descriptions" later
in this section for detailed information about these parameters.
and arrows to scroll upward
arrow to close the
arrow again to

2CH STATUS

• Provides information about 2-channel input sources.
• Features L and R level meters. See "STATUS Menu Level
Meters" on page 2-19 for more information.
Parameter Possible Settings
INPUT the selected input
MODE the activated listening mode
INPUT TYPE ANLG, PCM
SAMPLE RATE 44.1kHz, 48kHz, 88.2kHz, 96kHz
See "STATUS Menu Parameter Descriptions" on page 2-18 for detailed information
about these parameters.
Basic Operation
2-15