Command Bank Activation; To Activate The Shift 1 Or Shift 2 Command Bank; To Adjust A Parameter Setting With A Horizontal Bar Graph; Command Matrix - Lexicon MC-4 User Manual

MC-4

To adjust a parameter setting with a horizontal bar graph:

1. When the horizontal bar graph appears, press the remote
control Menu and arrows to increase and decrease the
setting in the designated increments. The current setting
appears to the right of the parameter name on the on-screen
and front panel displays.
2. When the desired adjustments have been made, press the
Menu arrow to select the setting and close the horizontal
bar graph.

COMMAND BANK ACTIVATION

Remote control buttons perform different commands depending
on whether the default, Shift 1 or Shift 2 command bank is
activated. For instance, pressing the remote control L7 button
selects the Logic 7 listening mode. Pressing the L7 button while
the shift 1 command bank is activated selects the Panorama
listening mode. Pressing the L7 button while the shift 2 command
bank is activated selects the 2-CH Surround listening mode.
The default command bank does not need to be activated; it
remains activated unless the Shift 1 or Shift 2 command bank is
activated.
• Pressing and holding the remote control S1 button activates
the shift 1 command bank.
• Pressing and holding the remote control S2 button activates
the shift 2 command bank.
• The S1 and S2 buttons themselves do not send commands
to the MC-4. When pressed and held, these buttons activate
the associated command bank.

To activate the Shift 1 or Shift 2 command bank:

1. Press and hold the remote control S1 button to activate the
shift 1 command bank or press and hold the S2 button to
activate the shift 2 command bank.
2. While holding the selected button, press and release the
desired remote control button to send the associated
command to the MC-4. See "Command Matrix" on page 2-9
for more information about the commands remote control
buttons perform when each command bank is active.
3. Release the S1 or S2 button to deactivate the associated
command bank.
The ON-SCREEN DISPLAY menu REMOTE STATE parameter
controls the remote control command bank indicator. When the
REMOTE STATE parameter is ON, a command bank indicator
appears in the top-right corner of the on-screen display to indicate
the last command bank from which the MC-4 received a
command. When the REMOTE STATE parameter is OFF, no
command bank indicator appears on the on-screen display.
• A 1 appears when a command from the shift 1 command
bank was received last.
• A 2 appears when a command from the shift 2 command
bank was received last.
• No character appears when a command from the default
command bank was received last.

COMMAND MATRIX

The command matrix that begins on the next page describes the
commands remote control buttons perform when each command
bank is active.
Basic Operation
2-9