Dc-1 Effects; Customizing Effects; Comparing A Modified Effect To The Factory Preset; Effect - Lexicon DC-1 - REV 1 Owner's Manual

DC-1 Digital Controller
When EFFECT ADJUST is selected from the Main menu, the on-screen
display shows a list of parameters specific to the current effect, as well as the
current value of each parameter. (The front panel display shows one
parameter at a time). Press the MENU
the displayed list. Press SELECT to activate a two-line display which allows
you to use the and buttons to alter the selected parameter's value. Press
DONE to confirm the change and move on to the next menu item. Each DC-
1 Effect and its parameter menu is described in the following section.
Although the list of available parameters will vary with different effects, the
last item in each menu is always CUSTOM. Selecting CUSTOM calls up a
sub-menu which allows you to name your custom effects, to compare your
version with the original preset, or to restore the preset versions of the Effect
name and parameter values.
When first shipped, the DC-1 has a set of default values assigned to each
Effect. These values have been determined to be generally suitable for initial
listening. As every installation has its own unique characteristics, and
listeners have distinctly different preferences, you will want to tailor the
Effects to suit your own requirements. To allow easy cutomization, any
parameter changes you make take effect instantly, and automatically be-
come a part of the Effect. You can even change the name that appears on-
screen. Once you have made the changes you want, the Effect will remain
as you have set it unless you alter it again, or deliberately restore the factory
preset parameter values.
Selecting CUSTOM from any Effect Adjust menu will give you access to the
controls listed to the side and described below. Use MENU
highlight any menu item, then press SELECT to open the submenu.
LISTEN CUSTOM PRESET lets you compare your edited version of an
Effect with the original version as set at the factory. When this control is
selected, MENU and
your modified version ("custom"). The display will confirm whether you
are LISTENING TO CUSTOM or PRESET.
Note that this function is available, even if you have not made any changes
to an Effect. Until you make parameter changes to create a custom version
of a preset, the LISTEN TO CUSTOM option will contain an exact duplicate
of the preset Effect.
and buttons to move through
allow you to alternate between the "preset" and

DC-1 Effects

DC-1 Effects

Customizing Effects

and to
Comparing a modified Effect
to the factory preset version
3
DC-1Effects
31