Restoring Factory Default Settings - Lexicon MC-12HD User Manual

Style Guide

RESTORING FACTORY DEFAULT SETTINGS

When factory default settings are restored, all parameters and
values that the owner has defined are restored to their factory
default settings. Before restoring factory default settings, you
should record all of your current settings.
FACTORY SETTINGS
EXIT
RESTORE DEFAULTS
To restore factory default settings:
1. Select one of the following options to record user defined settings:
• Use the Configuration Tool to download current MC-12HD
settings to a personal computer (PC). The configuration
tool is available at www.lexicon.com/downloads/index.asp
• Record the settings you have defined on the installation
worksheet that begins on page A-21.
2. If the MC-12HD is not in standby mode, press the Standby
Button.
3. When standby mode is activated, press the Standby Button
again, then quickly press and hold the Mute button until the
FACTORY SETTINGS menu shown above opens on the
on-screen and front panel displays.
Note:
The Mute button must be pressed within 2 seconds of deactivating
standby mode. Otherwise, the "MUTE ON" message will appear on
the on-screen and front panel displays. If this occurs, too much time
has passed. Press the Standby button and begin again at step 3.
FACTORY SETTINGS
HAVE BEEN RESTORED
PRESS ANY KEY
TO RESTART
Troubleshooting & Maintenance
4. Press the remote control
RESTORE DEFAULTS, then press the
close the FACTORY SETTINGS menu without restoring factory
default settings, highlight EXIT, then press the
button.)
The FACTORY SETTINGS message appears on the front panel
and on-screen displays. When this message appears, press a
front panel or remote control button to restart the MC-12HD.
or arrow button to highlight
arrow button. (To
arrow
6-5