Part Identification Chart - Freemotion F 5.8 User Manual

PART IDENTIFICATION CHART

See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled. To avoid damaging parts, do not use power tools for assembly.
M10 Split
Screw (86)–12
Washer (128)–2
3/8" x 3/4" Patch
Screw (123)–2
#8 x 3/4" #8 x 1" Tek
Screw (126)–8
3/8" x 1" Patch
Screw (122)–4
#8 x 35mm
Screw (125)–1
3/8" x 3" Screw
(124)–2
6
1/4" x 3/4" Patch
Screw (127)–4