Troubleshooting - ColorKey Mover Wash HEX 12 User Manual

Rgbaw+uv moving head wash light
Table of Contents

Advertisement

Using Slave modes (SL1, SL2) to create a light show
Using 4 or more lights for best effect, Mover Wash HEX can help create auto-light
shows by engaging Auto Programs on the Master fixture and having slaves
connected in varying sequences to display varied yet synchronized light shows.
1. Set each of the desired slaves SL1, SL2:
n Go to SLNd in the main menu and press enter.
n Select SL1.
n Repeat steps for each slave fixture SL1 and SL2
2. Set the master:
n Go to SLNd in the main menu and press enter.
n Select NASt.
• Accessing the (ShNd) programs on the Master light will now create varying displays
of synchronized light on the master and slave fixtures through (Auto) and (SoUn)
functions.

Troubleshooting

Problems
No DMX Control
Head position is off
centered at startup
Master / Slave
Ensure your DMX controller is sending signal and you are
using a proper and working DMX cable.
See directions on pg. 7 "Fine tuning your Mover Wash
Hex 12 start position"
For a direct copy of the master (NASt), select SL1. For a
synchronized yet varied Auto Show, select SL2.
9
Solutions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mover Wash HEX 12 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Cku-5039

Table of Contents