Audi A8 2010 Workshop Manual page 19

Hide thumbs Also See for A8 2010:

Table of Contents

Simos direct petrol injection and ignition system (6-cyl. 3.0 ltr. TFSI 4-valve) - Edition 12.2011

Fitting location of continued coolant circulation pump -V51-

♦ At front left of engine

Removing and installing ⇒ Rep. gr. 19

Fitting location of engine speed sender -G28-

2 - Electrical connector for engine speed sender -G28-

Fitting location of secondary air inlet valves and intake manifold

flap valve -N316-

♦ At rear of supercharger with charge air cooler

1 -

Secondary air inlet valve -N112-

2 -

Intake manifold flap valve -N316-

3 -

Secondary air inlet valve 2 -N320-

Fitting location of secondary air pump motor -V101-

♦ In engine compartment (front left)

Removing and installing ⇒ Rep. gr. 26

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

with respect to the correctness of information in this document. Copyright by AUDI AG.

Audi A8 2010 ➤

2. Injection system

Table of Contents