Audi A8 2010 Workshop Manual page 12

Audi A8 2010 ➤
Simos direct petrol injection and ignition system (6-cyl. 3.0 ltr. TFSI 4-valve) - Edition 12.2011
1 - Coolant temperature send‐
er -G62-
❑ Fitting location
⇒ page 14
2 - Intake manifold flap poten‐
tiometer 2 -G512-
❑ Fitting location
⇒ page 13
3 - Fuel pressure sender -
G247-
❑ Fitting location
⇒ page 12
❑ Lubricate threads
❑ 22 Nm
4 - Knock sensor 2 -G66-
❑ Fitting location
⇒ page 12
❑ Fitting location of con‐
nector ⇒ page 10
5 - Injectors, cylinder bank 2
❑ Injector, cylinder 4 -
N33-
❑ Injector, cylinder 5 -
N83-
❑ Injector, cylinder 6 -
N84-
❑ Removing and installing
⇒ page 30
6 - Secondary air inlet valve -
N112-
❑ Fitting location
⇒ page 15
7 - Intake manifold flap valve -N316-
❑ Fitting location ⇒ page 15
8 - Secondary air inlet valve 2 -N320-
❑ Fitting location ⇒ page 15
9 - Regulating flap control unit -J808-
❑ Fitting location ⇒ page 12
❑ Removing and installing
10 - Lambda probe 2 after catalytic converter -G131-
❑ With Lambda probe 2 heater after catalytic converter -Z30-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
❑ Fitting location ⇒ page 11
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
❑ Fitting location of connector
❑ Removing and installing
11 - Engine fault warning lamp
❑ In instrument cluster
12 - Accelerator position sender -G79- and accelerator position sender 2 -G185-
❑ In accelerator pedal module; fitting location
13 - Brake light switch -F- / brake pedal switch -F47-
❑ Fitting location ⇒ page 10
8
Rep. gr.24 - Mixture preparation - injection
⇒ page 27
⇒ page 10
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 44
⇒ page 10