Simos direct petrol injection and ignition system (6-cyl. 3.0 ltr. TFSI 4-valve) - Edition 12.2011
Fitting location of Lambda probes on cylinder bank 1 (right-side)
1 -
Lambda probe -G39- with Lambda probe heater -Z19-
2 -
Lambda probe after catalytic converter -G130- with Lambda
probe 1 heater after catalytic converter -Z29-
Fitting location of Lambda probes on cylinder bank 2 (left-side)
1 -
Lambda probe 2 -G108- with Lambda probe heater 2 -Z28-
2 -
Lambda probe 2 after catalytic converter -G131- with Lamb‐
da probe 2 heater after catalytic converter -Z30-
Fitting locations at high-pressure pump
♦ On right side of cylinder head
1 -
Fuel pressure sender for low pressure -G410-
2 -
Fuel metering valve -N290-
Fitting locations below intake manifold (bottom section) on cylin‐
der bank 1 (right-side)
1 -
Injector, cylinder 1 -N30-
2 -
Injector, cylinder 2 -N31-
3 -
Injector, cylinder 3 -N32-
4 -
Knock sensor 1 -G61-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2010 ➤
11
2. Injection system