Audi A8 2010 Workshop Manual page 18

Hide thumbs Also See for A8 2010:

Table of Contents

Audi A8 2010 ➤

Simos direct petrol injection and ignition system (6-cyl. 3.0 ltr. TFSI 4-valve) - Edition 12.2011

Fitting location of Hall sender and camshaft control valve on cyl‐

inder bank 2 (left-side)

1 -

Hall sender 2 -G163-

2 -

Camshaft control valve 2 -N208-

Fitting location of valve for oil pressure control -N428-

♦ On engine (bottom left)

4 - Valve for oil pressure control -N428-

Removing and installing ⇒ Rep. gr. 17

Fitting location of coolant temperature sender -G62-

♦ At front of engine

1 -

Electrical connector for coolant temperature sender -G62-

Fitting location of charge air cooling pump -V188-

♦ Beneath longitudinal member (front left)

Removing and installing ⇒ Rep. gr. 19

Rep. gr.24 - Mixture preparation - injection

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not

permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

with respect to the correctness of information in this document. Copyright by AUDI AG.

Table of Contents