Mounting - Daikin homecontrols EKRRVATU1BA Installation And Operation Manual

Start-up
You can manually start the connection mode for
another 3 minutes by pressing the system button
shortly (see figure 3).
8. Follow the instructions in the app.
5.2

Mounting

Read this entire section before starting
to mount the accessory.
The DHC Radiator Thermostat can be easily installed
without draining heating water or intervening in the heat-
ing system. No special tools are required, nor does the
heating have to be switched off.
The union nut (E) attached to the DHC Radiator
Thermostat can be used universally for all valves with a
thread size of M30 x 1.5 from the most popular manufac-
turers such as:
• Heimeier
• MNG
• Junkers
• Landis&Gyr (Duodyr)
• Honeywell-Braukmann
• Oventrop
• Schlösser
• Comap
14