Mounting - Daikin Home Controls EKRRVATR2BA User Reference Manual

Start-up
5.2

Mounting

Read this entire section before starting to
mount the accessory.
The DHC Radiator Thermostat can be easily installed with-
out draining heating water or intervening in the heating sys-
tem. No special tools are required, nor does the heating
have to be switched off.
The union nut (A) attached to the DHC Radiator Thermostat
can be used universally and without accessories for all
valves with a thread size of M30 x 1.5 from the most popu-
lar manufacturers such as:
• Heimeier
• MNG
• Junkers
• Landis&Gyr (Duodyr)
• Honeywell-Braukmann
• Oventrop
• Schlösser
• Comap
• Valf Sanayii
• Mertik Maxitrol
• Watts
• Wingenroth (Wiroflex)
• R.B.M
• Tiemme
• Jaga
18