Operation - Daikin homecontrols EKRRVATU1BA Installation And Operation Manual

Operation

6 Operation
After connecting and mounting the DHC Radiator
Thermostat, simple operations are available directly on
the accessory.
If the DHC Radiator Thermostat is in standby
mode, press the control wheel (A) once before op-
eration to activate the accessory.
• Temperature: Turn the control wheel (A) to man-
ually change the temperature.In automatic mode,
manual changes are activated until the next point
at which the schedule changes. Afterwards, the
defined schedule will be activated again. In man-
ual mode, the temperature remains activated until
the next manual change.
• Manual and automatic mode: Long press the
control wheel (A) to switch between manual and
automatic mode. In automatic mode, the defined
schedule of the ONECTA app is active. In manual
operation, the temperature can be set directly on
the accessory or via the app and will remain active
until the next manual change.
Boost function: Press the control wheel (A)
•
briefly to activate the boost function. The boost
function will heat up the radiator quickly and short-
ly by opening the valve.
22