Mounting; Adhesive Strip Mounting - Daikin homecontrols EKRCTRDI2BA Installer And User Manual

Start-up
5.2

Mounting

Read this entire section before starting to
mount the accessory.
You can fix the DHC Room Thermostat to a wall with:
• the supplied double-sided adhesive strips, or
• the supplied screws.
You can also mount the DHC Room Thermostat on a
flush-mounted box.
5.2.1

Adhesive strip mounting

To mount the DHC Room Thermostat using the adhesive
strips, proceed as follows:
1. Choose a site for installation.
Make sure that the mounting surface is smooth,
solid, non-disturbed, free of dust, grease and sol-
vents and not too cold to ensure long-time adher-
ence.
2. Insert the electronic unit (A) into the wall mounting
plate (see figure 5). Make sure that the electronic
unit properly engages into the wall mounting plate.
3. Fix the adhesive strips on the back side of the wall
mounting plate in the provided area. You should be
able to read the letters ("TOP") on the back side
(see figure 6).
20