Table of Contents
Advertisement
Restore factory settings
9
Restore factory settings
The factory settings of the accessory can be re-
stored. If you do this, you will lose all your settings.
To restore the factory settings of the accessory, proceed
as follows:
1. Open the battery compartment (B) by pulling the
cover backwards and then down (see figure 7).
2. Remove the batteries.
3. Insert the batteries again (see figure 8) and long
press the system button (C) at the same time (see
figure 3).
»
The LED quickly starts flashing orange.
4. Release the system button.
5. Long press the system button again.
»
The LED lights up green.
6. Release the system button to finish the procedure.
»
The accessory will perform a restart.
28
Advertisement
Table of Contents
Need help?
Do you have a question about the homecontrols EKRRVATU1BA and is the answer not in the manual?
Questions and answers