Start-Up; Connecting Further Dhc Accessories - Daikin homecontrols EKRRVATU1BA Installation And Operation Manual

Table of Contents

Start-up

5.1

Read this entire section before starting

connecting other devices.

First set up your DHC Access Point via the

ONECTA app to enable operation of other DHC

accessories within your system. For further infor-

mation, see the manual of the DHC Access Point.

To integrate the DHC Radiator Thermostat into your eco-

system and to enable control via the ONECTA app, you

must connect it to your DHC Access Point first. To do this,

proceed as follows:

1. Open the ONECTA app.

2. Click on the plus symbol.

3. Select the menu item Add Daikin Home Con-

trols.

4. Select Add DHC Accessory.

5. Open the battery compartment (B) by pulling the

cover backwards and then down (see figure 7).

6. Remove the insulation strip from the battery com-

partment.

7. Connection mode remains activated for 3 minutes.

Start-up

Table of Contents

Do you have a question about the homecontrols EKRRVATU1BA and is the answer not in the manual?