Preferred DNS Server
Alternative DNS Server
○ VLAN Port Settings
The user can use LAN ports to allow only specific VLANs on each LAN port and in case there are more than one VLAN then
there is an option to choose one VLAN as the default VLAN ID (PVID or Port VLAN Identifier). Click on
Port Settings or click on
Allowed VLANs
Choose the VLANS to be allowed on this port.
PVID
Select the Port VLAN Identifier or the default VLAN ID
Static IP Binding
Users can use the feature to set Static IP Binding to certain clients, to whom they do not want the IP address to change.
To configure Static IP Binding, please follow the below steps:
1- Go under the menu Network Settings → LAN → Static IP Binding.
2- Click button
to create a new entry.
3- Enter the device's MAC address and IP address.
Enter the Preferred DNS Server
Enter the Alternative DNS Server
Table 7: Add or Edit VLAN
to delete that configuration and bring back the default settings which is by default VLAN 1.
Figure 28: VLAN Ports
Table 8: VLAN Port Settings
to edit the VLAN