Table of Contents
Advertisement
Figure 39: Access Devices – Configuration page
Access Point Location
GWN70xx router has an interesting feature to help users to locate different access points using blinking LED, to do so go
under the Access Devices → Status page then click on
and the corresponding LED will start blinking its LEDs. This can help
ease locating the Access points on a multi-deployment site.
Figure 40: Access Devices – Status page
SSIDs
When using GWN70xx as Master, users can create different SSIDs and add GWN76xx Slave Access Points to each SSID
depending on the needs of the customer.
Log in as Master to the GWN70xx Web GUI and go to Wi-Fi Settings → SSIDs.
Click on
to Add new SSID or click on Operations
to edit the current SSID.
Figure 41: SSIDs Page
When editing or adding a new SSID, users will have two tabs to configure:
In the Wi-Fi Settings Tab, the user can enter all the configurations related to this SSID by specifying the name and the VLAN
and the option for dual-band as well as other security options including the password, etc.
Advertisement
Table of Contents
