Creating Client Certificate - Grandstream Networks GWN70 Series User Manual

The server certificates (.crt and .key) will be used by the GWN70xx router when acting as a server.
The server certificates (.crt and .key) can be exported and used on another OpenVPN® server

Creating Client Certificate

To create a client certificate, follow the below steps:
1. Create Users
○ Navigate to "Web UI → System Settings → Certificate Management → User".
○ Click on button. The following window will pop up.
Enter User information based on the below descriptions.
Status Click on "ON" to enable the user.
Full Name Choose full name to identify the users.
User Name Choose username to distinguish user's certificate.
Password Enter user password for each username.
Used to indicate which networks are located behind the remote device when the user account is used by an
OpenVPN Subnet
OpenVPN client router to establish a site-to-site VPN.
2. Create Client Certificate
○ Navigate to "Web UI → System Settings → Certificate Management → Certificate".
○ Click on button. The following window will pop up.
Figure 52: User Certificate
Table 17: Client Certificate