Table of Contents
Advertisement
Operating Instructions
Surgical Laser Unit Limax
NOTICE
When saving the program, both parts – A and B – are stored in the system's memory. The
notice "modified" is deleted as a result.
To delete the inactive part of a SWAP program, select Delete A/B mode.
However, this change will be retained only if you save the program via "Save under" or
"Overwrite".
6.14.5
Saving Modified Programs
V. 2.0
®
120
The large part (left) of the parameter
section shows the active part of the program
(here: A). The active program can now be
modified by selecting the parameter of your
choice. The < SWAP A/B menu item enables
you to exchange (swap) the two parts of the
program.
The inactive parameters are highlighted in green
and cannot be selected. To toggle between the
A and B modes, you can use the < SWAP A/B
menu item or simply operate the left pedal of
the SWAP foot switch.
If the current program has been changed, the
notice modified is displayed to the right of the
name of the program.
You have the following options to save a
modified program via the > Programs menu:
> Save under
Use this option if you wish to retain the original
program in addition to the modified version.
> Overwrite
Use this option if you need the program in its
modified version only.
59
Advertisement
Table of Contents
