Table of Contents
Advertisement
6.1.8
Display
The above screenshot shows the laser
display during laser power setting (item 4,
highlighted in orange).
Pressing the rotary switch axially confirms
the value and terminates the power setting
process.
42
Surgical Laser Unit Limax
The laser display (Fig. 6.1, (1)) consists of the
following elements:
Name (1) of the currently set laser
•
program – with notice "modified" (5) if the
stored program has been changed in any
way
Information line (2) for notices or actions
•
to be carried out
Program parameters (3) – The following
•
parameters can be set at the user's choice:
laser power (watts),
operating mode,
pulse time and pulse pause (seconds),
work suction (percent) and
work flow (percent).
Active field (4) – The highlighted field
•
(orange) shows the parameter which can
now be adjusted.
Laser status indicator (6),
•
see section 6.1.9 "Laser Status Indicator",
page 43.
Date and time (7)
•
Display fields (8) for
•
number of laser pulses,
applied laser energy (joules) and
total treatment time (hours, minutes and
seconds)
Menu section (9)
•
<BACK – This command is used to exit the
current menu level,
Last Used Programs – Indicates the
4 last-used programs,
Programs – Offers menus for working with
programs,
VAC – Menu for smoke evacuator setting,
AIR – Menu for airflow setting,
Setup – Menus for device parameter setting
Filter Life (10) – Indicates the remaining
•
life of the VAC filter (see also section 6.1.10
"FILTER LIFE", page 44).
Operating Instructions
®
120
V. 2.0
Advertisement
Table of Contents
