Operating Instructions
Surgical Laser Unit Limax
6.1.1
Keylock Switch
NOTICE
The keylock switch disconnects the unit all-pole from the power supply network!
6.1.2
Emergency Stop Switch
V. 2.0
®
120
The keylock switch (Fig. 6.1, (7)) is used to turn the unit
on and off.
Vertical key position: unit switched off
Horizontal key position: unit switched on
The key can be withdrawn only in vertical position (0).
Operating the emergency stop switch (Fig. 6.1, (2)) blocks
laser light emission immediately.
To operate the switch, press it down.
This does not disconnect the laser from the power supply.
The pushbutton locks home when operated (pushed
inwards). To resume operation, you need to pull out the
button first.
The emergency stop switch is marked with a STOP symbol
(Fig. 6.1, (3)) attached below the red button.
37