Endress+Hauser Micropilot FMR60B Technical Information page 62

RN42
Document function
62
Single-channel active barrier with wide-range power supply for safe electrical isolation of
4 to 20 mA standard signal circuits, HART transparent.
Technical Information TI01584K and Operating Instructions BA02090K
Documentation
For an overview of the scope of the associated Technical Documentation, refer to the following:
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number from the
nameplate
• Endress+Hauser Operations App: Enter the serial number from the nameplate or scan the
matrix code on the nameplate
Document type
Technical Information (TI)
Brief Operating Instructions (KA)
Operating Instructions (BA)
Description of Device Parameters
(GP)
Safety Instructions (XA)
Supplementary device-dependent
documentation
Registered trademarks
HART®
Registered trademark of the FieldComm Group, Austin, Texas, USA
Bluetooth®
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Endress+Hauser is under license. Other trademarks and trade names are
those of their respective owners.
Apple®
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc.
Android®
Android, Google Play and the Google Play logo are trademarks of Google Inc.
KALREZ®, VITON®
Registered trademarks of DuPont Performance Elastomers L.L.C., Wilmington, DE USA
Purpose and content of the document
Planning aid for your device
The document contains all the technical data on the device and provides
an overview of the accessories and other products that can be ordered for
the device.
Guide that takes you quickly to the 1st measured value
The Brief Operating Instructions contain all the essential information
from incoming acceptance to initial commissioning.
Your reference guide
These Operating Instructions contain all the information that is required
in the various life cycle phases of the device: from product identification,
incoming acceptance and storage, to mounting, connection, operation
and commissioning, through to troubleshooting, maintenance and
disposal.
Reference for your parameters
The document provides a detailed explanation of each individual
parameter. The description is aimed at those who work with the device
over the entire life cycle and perform specific configurations.
Depending on the approval, safety instructions for electrical equipment in
hazardous areas are also supplied with the device. They are an integral
part of the Operating Instructions.

The nameplate indicates which Safety Instructions (XA) apply to
the device in question.
Additional documents are supplied depending on the device version
ordered: Always comply strictly with the instructions in the
supplementary documentation. The supplementary documentation is an
integral part of the device documentation.
Micropilot FMR60B HART
Endress+Hauser