Table of Contents
Advertisement
User's Manual
K. PS/2 mouse function
If your system has a PS/2 mouse port and you install a serial pointing device,
select Disabled.
L. USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller
and you have USB peripherals.
M. Init Display First
This function allows user to choose between AGP slot or VGA slot to initialize
Display first .
O. Power Failure Recovery
Computers using an ATX power supply do not turn back on after the power source
to the computer unexpectedly fails (i.e. electricity outage). Enabling this setting
will allow the system to always turn back on after a power failure. This is especially
important for computers that must be on 24 hours per day.
42
Advertisement
Table of Contents
