CHAINTECH CT-5SSV Manual page 36

User's Manual
B. Power Management
Power management allows the computer to save electricity when it is not in use
by entering increasingly deep power saving modes as shown by the diagram below.
Figure 3-6 Power Saving Mode Flow Chart
The computer runs in Normal operation mode until the Doze timer expires, at which
point the computer enters Doze mode. If no external activity occurs, the computer
will go into Standby and Suspend modes when their respective timers expire. If
external activity occurs, the computer will wake up from Power Management and
return to Normal mode. To activate the function, set Power Management to
Maximum Saving, User Define, or Minimum Saving described below. For a
description of the power saving modes (Doze, Standby, and Suspend) see their
descriptions below.
Disabled - Turns off the Power Management functions.
Max. Saving - All timers are set at the minimum value of one minute to
maximize power saving.
Min. Saving - All timers are set at the maximum value of one hour for
minimal power saving.
User Define - User can configure the timer to a desired time according to the
values available.
Note that enabling the Power Management function will result in enabling the
HDD Power Down function (Max Saving = 15 min, Min Saving = 1 min). The
HDD Power Down function is not part of the Power Management scheme as
indicated in Figure 3-6 Refer to the Standby Mode, Suspend Mode, and HDD
Power Down descriptions below for more informaiton on hard drive power
management.
C. Video Off Option
This setting determines when the monitor enters power saving mode. As the
function name indicates, the monitor enters the power saving mode after the chosen
event expires. The Power Management function must be enabled to use this
function.
D. Video Off Method
This function serves as both a screen saver and power saver for monitors.
See the next function, Video Off After, for setting the video timer.
32