CHAINTECH CT-5SSV Manual page 39

O. Power On By Keyboard
Set to Disabled to control your computer's power by the button on your system
case. Set this function to Any Key to turn on the computer by touching any
key on the keyboard. If you set this function to Hot Key or Password you must
designate the keystrokes that will turn on the computer. Note that the power button
is always able to turn on the computer regardless of how this function is set.
If you have forgotten your passord, you must remove the power cable from
the ATX power supply connector and clear the CMOS data as discussed
in Section 2-4 to clear the password.
P. Power On By Modem
When enabled, a modem that receives a call will wake up the system from
soft off and green mode. You should connect the modem to the COM port
and turn on the resume event in green mode.
Q. Power On By Alarm
When enabled, this setting allows the system to turn back on at a designated
time of the month. User must designate date of month and time of day.
This function is only available when using an ATX power supply and the Software
Power-Off function to turn off the computer. See the Software Power-Off feature
in Section 2-4 of this manual for instructions.
Award BIOS Setup Program
35