Geosense MEMS DPI I Instruction Manual page 26

MEMS Digital Portable Horizontal Inclinometer
V1.1
09/02/2022
9) Press the ON/OFF button on the side of the reel, holding until it its light
switches on. This shows that the power is on with a GREEN light indicating an
adequate battery level and a RED light indicating insufficient battery (the reel
should be charged before monitoring is carried out).
10) On the ASD, check that the 'Bluetooth' symbol is showing in the top bar. (By
default, it is set to turn on but if it is not, go to the ASD settings and turn it on).
11) Open the Geosense® Inclinometer Application 'IncloPRO'. For detailed 'App'
operating instructions, see Section 9.
Tap the 'Connections' icon on the lower menu bar to open the Connections
page.
A list of 'Paired Reels' will be presented. Check that the serial number of the
reel to be used is included in the list. If not, tap the 'SEARCH FOR NEW
REEL' bar.
A list of all local Bluetooth devices will be presented on the screen. Scroll
through the list to locate the serial number of the Reel being used and tap on
it to activate the pairing operation.
25