Table of Contents
Advertisement
MEMS Digital Portable Horizontal Inclinometer
V1.1
09/02/2022
5) Remove the cap from the reel connector and fit the charger lead to the reel.
(Figure 12: Charge Port - Inclinometer Reel)
Figure 12: Charge Port - Inclinometer Reel
6) Connect the charger to a mains electrical supply, switch it on and allow the
readout to charge fully. (Indicated by a solid green light)
20
Advertisement
Table of Contents
Need help?
Do you have a question about the MEMS DPI I and is the answer not in the manual?