[Output Settings] - Konica Minolta bizhub C3100i User Manual

[Output Settings]

Configure the settings for printing from the machine.
[Print ID]
Specify whether to print the user ID, and select the location where the ID is printed.
[Print Text]
Specify whether to print Page Description Language (PDL) data as text when the data is not
supported by the machine.
[Substitute Tray]
Specify whether to use paper of a different size when the paper that is loaded in the specified tray
does not match the paper size settings for the current job.
[A4/Letter Switch]
Specify whether to print A4 size jobs on Letter size paper if A4 size paper is not available, or to print
Letter size jobs on A4 size paper if Letter size paper is not available.
[Prioritize Bypass Tray]
Specify whether to use the bypass tray when the paper tray is automatically selected from the print
driver.
When [On] is specified, the paper tray is automatically selected from the printer driver, and the
Bypass Tray is loaded with paper, the Bypass Tray will be used.
[Show Size Mismatch Error]
Specify whether an error is to be indicated on the operator panel in cases where the paper size
specified in the print driver matches that on the operator panel, but the paper size specified in the
print driver is different from that loaded in the specified tray.
When [Off] is selected, there is a possibility that the following may occur with all trays.

- When the paper size is smaller than the document size, the back side of the paper may become soiled.
- Printing may take some time.
- Misalignment may occur with two-sided printing.
With Tray 1, the following may occur.

- Paper jams may occur when using paper sizes A5, B6 or smaller.
- Paper may remain inside the machine after printing.
- Paper jams may occur when using paper sizes smaller than A5 for two-sided printing.
 With Tray 2 (Paper Feed Unit PF-P26) (optional), the following may occur.
- Paper jams may occur when using paper size A5 or smaller.
- Paper may remain inside the machine after printing.
 With the Bypass Tray, the following may occur.
- Paper jams may occur when using paper size A5 or smaller for two-sided printing.
[Banner Sheet]
Specify banner sheet insertion position and the tray from which to print.
6.11 [Advanced Settings]
71