Konica Minolta bizhub C3100i User Manual page 151

[Dynamic DNS Registration]
Specify whether to update DNS dynamically.
 [Dynamic DNS Registration (IPv4)]
When [Dual Stack] or [IPv4] is selected for [IP Mode] in [Common], specify whether to update DNS
dynamically.
 [Dynamic DNS Registration (IPv6)]
When [Dual Stack] or [IPv6] is selected for [IP Mode] in [Common], specify whether to update DNS
dynamically.
[802.1X]
Configure printer settings for enabling IEEE 802.1x authentication on your network. This function is
available when your network environment supports IEEE 802.1x.
To edit the settings, click [Setup] to display the [802.1X] dialog box.
[Enable 802.1X]
Specify whether to enable the IEEE 802.1x protocol.
 [Authentication Method]
This item appears when [Enable 802.1X] is enabled.
Select the authentication method for IEEE 802.1x.

[User Name (Device Name)]
This item appears when [Enable 802.1X] is enabled.
Enter the user name (printer name) for IEEE 802.1x authentication. A null cannot be set. The
following characters can be entered:
 Up to 128 bytes
 Alphanumeric characters and symbols
 [Password]
This item appears when [Enable 802.1X] is enabled.
Enter the login password for IEEE 802.1x authentication. A null cannot be set. The following
characters can be entered:
 Up to 128 bytes
 Alphanumeric characters and symbols
 [Retype Password]
This item appears when [Enable 802.1X] is enabled.
Enter the same character string in [Password].
11.4 Connectivity
151